NEW - CI-Tech Road Marking Paint

Cone Products | NEW - CI-Tech Road Marking Paint |

CI-Tech The Stencil Ease Parking and Road Marking Stencil Kit

Ref: 91166536

Ideal for highway marking reinstatement, new markings, car parks, footpaths, cycleways, airports, ports, corporate logos, playgrounds and hard sports surfaces.
Gas bottle not included.
{Advantages}

The Stencil Ease parking lot and road marking stencil kit comes with everything needed to finish a commercial, industrial or school parking lot.
These traffic stencils are made from durable, reusable 60-mil (1/16 inch thick) plastic.
They can be cleaned and reused many times and each stencil in this kit typically includes 4 inches of extra material for prevention of overspray.

{Application}

Flexiline application has been designed to be as quick and easy as possible. Permanent markings can be obtained by one person and a gas torch.

Ensure the surface is clean, dry and free from dust, dirt or debris. Warm the road surface over the area to be laid. Layout Flexiline in the desired position, hold nozzle of blow torch 10-12 inches above the centre of the marking at one end. With a side to side motion, heat the material until it begins to soften and flow into the surface. Retain the distance of the flame from the marking to ensure that it does not scorch and continue heating. For initial retro-reflectivity, glass beads can be applied to the line during heating. Allow to cool, if fast cooling is required water can be sprayed over to assist.

{Note!}

Please Note: application of Flexiline is not advisable onto new asphalt until the surface has settled for at least 6-8 weeks. Where the surface is in doubt we suggest that Tack Coat is applied and a test patch is carried out before completion of the entire job. Please note: Tack Coat should be applied to the following surfaces before applying Flexiline, concrete or polished asphalt, previously dirty surfaces which have been thoroughly swept. Tack coat, gas torches and glass beads also available on request.

In stock
Price: £49.00 (Excluding VAT at 20%)

Quantity:

CI-Tech Road Marking Arrows - White

Ref: 91166535

Ideal for cycle lanes, parking bays, ghost islands, walkways and many more light traffic applications.

Suitable for asphalt and concrete.

{Advantages}

Creates a safer environment for pedestrians

Cost effective

Tough durable finish

Quick and simple to apply

{Application}

Easy to apply, markings are laid to the road surface, heated and sealed using a blow torch.

The use of primer is recommended when applying Flexiline to concrete or old/worn surfaces.

Can be used in conjunction with Anti-Slip Traffic Paint.

{Note!}

Not suitable for uncompacted asphalt e.g. tennis courts and playgrounds.

In stock

Style

Quantity:

CI-Tech Flexiline Road Markings 5m x 200mm

Ref: 91166534

Quick and easy to apply.

Flexiline provides all your requirements for hard wearing, quick and easily applied surface marking solutions. With the performance of hot applied thermoplastic these markings will last for years!

Ideal for highway marking reinstatement, new markings, car parks, footpaths, cycleways, airports, ports, corporate logos, playgrounds and hard sports surfaces.

Ideal for playground games and shapes to any design and size.

{Advantages}

Flexiline is available in preformed lines, letters, numbers and symbols. It is one of the fastest ways to permanently reinstate road markings, providing excellent cost effectiveness.

Flexiline provides exceptionally clean cut, crisp markings that can be trafficked within minutes of application.

Extremely durable, Flexiline can be applied at any time of the year, even in cold conditions and is ideal for car parks, cycleways and playgrounds.

Available in a variety of colours!

{Application}

Flexiline application has been designed to be as quick and easy as possible. Permanent markings can be obtained by one person and a gas torch.

Ensure the surface is clean, dry and free from dust, dirt or debris. Warm the road surface over the area to be laid. Layout Flexiline in the desired position, hold nozzle of blow torch 10-12 inches above the centre of the marking at one end. With a side to side motion, heat the material until it begins to soften and flow into the surface. Retain the distance of the flame from the marking to ensure that it does not scorch and continue heating. For initial retro-reflectivity, glass beads can be applied to the line during heating. Allow to cool, if fast cooling is required water can be sprayed over to assist.

{Note!}

Please Note: application of Flexiline is not advisable onto new asphalt until the surface has settled for at least 6-8 weeks. Where the surface is in doubt we suggest that Tack Coat is applied and a test patch is carried out before completion of the entire job. Please note: Tack Coat should be applied to the following surfaces before applying Flexiline, concrete or polished asphalt, previously dirty surfaces which have been thoroughly swept. Tack coat, gas torches and glass beads also available on request.
In stock

Colour

Quantity:

CI-Tech Flexiline Road Markings 5m x 100mm

Ref: 91166533

Quick and easy to apply.

Flexiline provides all your requirements for hard wearing, quick and easily applied surface marking solutions. With the performance of hot applied thermoplastic these markings will last for years!

Ideal for highway marking reinstatement, new markings, car parks, footpaths, cycleways, airports, ports, corporate logos, playgrounds and hard sports surfaces.

Ideal for playground games and shapes to any design and size.

{Advantages}

Flexiline is available in preformed lines, letters, numbers and symbols. It is one of the fastest ways to permanently reinstate road markings, providing excellent cost effectiveness.

Flexiline provides exceptionally clean cut, crisp markings that can be trafficked within minutes of application.

Extremely durable, Flexiline can be applied at any time of the year, even in cold conditions and is ideal for car parks, cycleways and playgrounds.

Available in a variety of colours!

{Application}

Flexiline application has been designed to be as quick and easy as possible. Permanent markings can be obtained by one person and a gas torch.

Ensure the surface is clean, dry and free from dust, dirt or debris. Warm the road surface over the area to be laid. Layout Flexiline in the desired position, hold nozzle of blow torch 10-12 inches above the centre of the marking at one end. With a side to side motion, heat the material until it begins to soften and flow into the surface. Retain the distance of the flame from the marking to ensure that it does not scorch and continue heating. For initial retro-reflectivity, glass beads can be applied to the line during heating. Allow to cool, if fast cooling is required water can be sprayed over to assist.

{Note!}

Please Note: application of Flexiline is not advisable onto new asphalt until the surface has settled for at least 6-8 weeks. Where the surface is in doubt we suggest that Tack Coat is applied and a test patch is carried out before completion of the entire job. Please note: Tack Coat should be applied to the following surfaces before applying Flexiline, concrete or polished asphalt, previously dirty surfaces which have been thoroughly swept. Tack coat, gas torches and glass beads also available on request.
In stock

Colour

Quantity:

CI-Tech Flexiline Road Markings 5m x 75mm

Ref: 91166532

Quick and easy to apply.

Flexiline provides all your requirements for hard wearing, quick and easily applied surface marking solutions. With the performance of hot applied thermoplastic these markings will last for years!

Ideal for highway marking reinstatement, new markings, car parks, footpaths, cycleways, airports, ports, corporate logos, playgrounds and hard sports surfaces.

Ideal for playground games and shapes to any design and size.

{Advantages}

Flexiline is available in preformed lines, letters, numbers and symbols. It is one of the fastest ways to permanently reinstate road markings, providing excellent cost effectiveness.

Flexiline provides exceptionally clean cut, crisp markings that can be trafficked within minutes of application.

Extremely durable, Flexiline can be applied at any time of the year, even in cold conditions and is ideal for car parks, cycleways and playgrounds.

Available in a variety of colours!

{Application}

Flexiline application has been designed to be as quick and easy as possible. Permanent markings can be obtained by one person and a gas torch.

Ensure the surface is clean, dry and free from dust, dirt or debris. Warm the road surface over the area to be laid. Layout Flexiline in the desired position, hold nozzle of blow torch 10-12 inches above the centre of the marking at one end. With a side to side motion, heat the material until it begins to soften and flow into the surface. Retain the distance of the flame from the marking to ensure that it does not scorch and continue heating. For initial retro-reflectivity, glass beads can be applied to the line during heating. Allow to cool, if fast cooling is required water can be sprayed over to assist.

{Note!}

Please Note: application of Flexiline is not advisable onto new asphalt until the surface has settled for at least 6-8 weeks. Where the surface is in doubt we suggest that Tack Coat is applied and a test patch is carried out before completion of the entire job. Please note: Tack Coat should be applied to the following surfaces before applying Flexiline, concrete or polished asphalt, previously dirty surfaces which have been thoroughly swept. Tack coat, gas torches and glass beads also available on request.
In stock

Colour

Quantity:

CI-Tech Flexiline Road Markings 5m x 50mm

Ref: 91166531

Quick and easy to apply.

Flexiline provides all your requirements for hard wearing, quick and easily applied surface marking solutions. With the performance of hot applied thermoplastic these markings will last for years!

Ideal for highway marking reinstatement, new markings, car parks, footpaths, cycleways, airports, ports, corporate logos, playgrounds and hard sports surfaces.

Ideal for playground games and shapes to any design and size.

{Advantages}

Flexiline is available in preformed lines, letters, numbers and symbols. It is one of the fastest ways to permanently reinstate road markings, providing excellent cost effectiveness.

Flexiline provides exceptionally clean cut, crisp markings that can be trafficked within minutes of application.

Extremely durable, Flexiline can be applied at any time of the year, even in cold conditions and is ideal for car parks, cycleways and playgrounds.

Available in a variety of colours!

{Application}

Flexiline application has been designed to be as quick and easy as possible. Permanent markings can be obtained by one person and a gas torch.

Ensure the surface is clean, dry and free from dust, dirt or debris. Warm the road surface over the area to be laid. Layout Flexiline in the desired position, hold nozzle of blow torch 10-12 inches above the centre of the marking at one end. With a side to side motion, heat the material until it begins to soften and flow into the surface. Retain the distance of the flame from the marking to ensure that it does not scorch and continue heating. For initial retro-reflectivity, glass beads can be applied to the line during heating. Allow to cool, if fast cooling is required water can be sprayed over to assist.

{Note!}

Please Note: application of Flexiline is not advisable onto new asphalt until the surface has settled for at least 6-8 weeks. Where the surface is in doubt we suggest that Tack Coat is applied and a test patch is carried out before completion of the entire job. Please note: Tack Coat should be applied to the following surfaces before applying Flexiline, concrete or polished asphalt, previously dirty surfaces which have been thoroughly swept. Tack coat, gas torches and glass beads also available on request.
In stock

Colour

Quantity:

Cone Products | NEW - CI-Tech Road Marking Paint |

**sRecentPrefix**				<br/><br/><div class="recenththeader"><input class="recenthtbuttonright" id="scrollbackrecent" type="button" value="    Next >>" onclick="ScrollBackRecent();"><input class="recenthtbuttonleft" id="scrollforwardrecent" type="button" value="<< Previous" onclick="ScrollForwardRecent();"><div style="text-align:center">Recently Viewed</div></div><br clear="all"/><table id="recenthtitem"> **sRecentImageRowPrefix**	<tr><td class="recenthtitemspacer" rowspan=4> </td> **sRecentImageItem**			<td class="recenthtitemimage"><a _HREF_="_SSURL_?PRODREF=_PID_&NOLOGIN=1" ><img border="0" width="75" src="_THUMB_" alt="_NAME_" /></a></td><td class="recenthtitemspacer" rowspan=4> </td> **sRecentImageRowSuffix**	</tr> **sRecentDescRowPrefix**	<tr> **sRecentDescItem**			<td class="recenthtitemdesc"><a _HREF_="_SSURL_?PRODREF=_PID_&NOLOGIN=1" >_NAME_</a></td> **sRecentDescRowSuffix**	 **sRecentPriceRowPrefix**	 **sRecentPriceItem**			 **sRecentPriceRowSuffix**	 **sRecentDeleteRowPrefix**	<tr> **sRecentDeleteItem**		<td class="recenthtitemdelete"><a href="javascript:DeleteRecent('_PID_', true);"><img src="xit.jpg" border="0" /></a></td> **sRecentDeleteRowSuffix**	</tr> **sRecentSuffix**				</table> **sRecentEmptyList**